RADVision SCOPIA XT4000 Series Guía de instalación descargar pdf (Pagina 39)

Before you begin

This procedure is performed as part of the basic configuration after “Configuring Network

Settings” on page 33.

Procedure

Step 1

Set the Enabled list to Yes.

Figure 5-6 XT Codec Unit

Step 2

Set the Mode list to Manual.

Step 3

Enter the IP address of the gatekeeper in the IP address field.

Step 4

Enter the H.323 number required to dial the XT Codec Unit in the Number H.323 field.

Step 5

Select Done.

The basic configuration of your SCOPIA XT Series is complete.

Setting the Administrator or User Password

You can set or change passwords for both user and administrator. The default password is

1234. We recommend that you change the administrator password when starting the system

configuration to prevent users from changing settings by mistake.

Procedure

Step 1

Access the SCOPIA XT Series web interface.

RADVISION | Installation Guide for SCOPIA XT4000 Series Version 3.0 Initial Configuration | 34

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 90 91

Sin comentarios

RADVision SCOPIA XT4000 Series Guía de instalación Pagina 39