RADVision Scopia XT5000 Series Guía de instalación descargar pdf (Pagina 63)

Procedure

Step 1

Press and select one of the following from the IP Address Mode list:

•

Automatic: (Default) Select this option if the system gets its IP address automatically

(using DCHP).

The IP address, SubNet mask, Gateway, and DNS fields appear as read-only. See Table

5-4 on page 59 for a description of these fields.

•

Manual: Select this option if you require a static public IP address. This is required, for

example, if the XT5000 Series is connected directly to the Internet, without any address

translation. Enter the fields as described in Table 5-4 on page 59.

Figure 5-19 Defining IP Settings

Step 2

If you selected Manual, configure the following, as instructed by the system administrator:

RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Initial Configuration | 58

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 112 113

Sin comentarios

RADVision Scopia XT5000 Series Guía de instalación Pagina 63