RADVision Scopia XT5000 Series Guía de instalación descargar pdf (Pagina 85)

•

You would not normally route the local microphone to a speaker. You can hear your own

voices in the room, so normally you would not need to route the microphones to speakers.

This will avoid feedback loops.

•

If you are showing a presentation on your computer and it includes sound, route the sound

of the computer to the analog input connector.

Procedure

Step 1

Access the audio output settings as follows:

•

From the endpoint interface, select Configure > Advanced > I/O connections > Audio -

Outputs > General.

•

From the web interface, select Administrator settings > I/O connections > Audio -

Outputs > General.

Figure 5-31 Defining the routing of the audio outputs from the web

interface

Step 2

Set the fields as required.

RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Initial Configuration | 80

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 112 113

Sin comentarios

RADVision Scopia XT5000 Series Guía de instalación Pagina 85