RADVision Scopia XT5000 Series Guía de instalación descargar pdf (Pagina 94)

Figure 5-36 Configuring QoS settings

Step 2

Set the fields as described in Table 5-18 on page 89.

Table 5-18 Configuring QoS settings

Field Name Description

Use QoS Enable/Disable QoS. If you set Use QoS to Yes, you will provide

different priority to different data stream, or guarantee a certain level

of performance to a data stream. In particular, you may choose

between Precedence/TOS and Differentiated Service.

Quality of service Precedence/TOS - For each stream (Audio, Video, Data, Signal) sent to

the system, you may define the Type Of Services and a Precedence to

fit network capabilities. Precedence is priority. A higher number sets a

higher priority. Used mainly to class router packets as high priority.

Differentiated Service - For each stream (Audio, Video, Data, Signal)

sent to the system, you may define a priority level to fit network

capabilities.

Step 3

In the web interface, select Save.

Note

In the endpoint, your changes are saved automatically.

RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Initial Configuration | 89

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 112 113

Sin comentarios

RADVision Scopia XT5000 Series Guía de instalación Pagina 94