search

RADVision Scopia XT5000 Series Guía de instalación Pagina 108

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 159
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 107
Field Name Description
Type In a standalone microphone, power and audio can be supplied over
the same wires; power is drawn from an external source but without a
separate power supply. This is called phantom power.
A built-in microphone, such as in a computer or the Scopia XT
Executive, does not need phantom power since it gets power from
the device itself, using the computer as its external power source, for
example.
When configuring these settings, verify the audio equipment
connection method: a balanced line reduces external noise
interference and allows to use very long cables.
Choose one of these settings:
•
Line - Select this option for an analog audio input without
phantom power. Then set the Mode field to Stereo or Mono
input (see below).
•
Microphone - Select this option if the analog audio is coming
from an analog balanced microphone that is using phantom
power.
Mode You can configure this field if you selected the Line setting. Choose
one of these options:
•
Stereo - The input is an L/R stereo unbalanced line without
phantom power.
•
Mono - The input is a mono balanced line without phantom
power.
3. From the web interface only, select Save.
4. (Optional) If you selected Analog associated with DVI as the Audio selection (see Table
24: Configuring analog audio connections on page 107), verify the DVI video input is enabled
as described below.
The remote endpoint hears the computer's audio.
a. Access the DVI settings as follows:
•
From the endpoint's main menu, select Configure > Advanced > I/O
Connections > Cameras > DVI.
•
From the XT Endpoint web interface, select Administrator Settings > I/O
Connections > Cameras > DVI.
b. Verify that Enabled is set to Yes.
Configuring Audio Outputs
About this task
The Scopia XT Endpoint for IP Office allows you to combine audio from various inputs such as the XT
Digital Microphone Array Pod, and route it to available audio outputs. The possible combination of inputs
Installation Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Initial Configuration | 108
Vista de pagina 107
1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 158 159

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Sistemas De Videoconferencia RADVision Scopia XT5000 Series
Sistemas De Videoconferencia RADVision Scopia Elite 5100 Series Especificaciones   (77 paginas)
  • Australian Pump Industries Matrix Elements AMERITRON FOCUS Enhancements Asda
  • Aeon Labs Metros de costes energéticos Samsung Televisores y monitores Garland Cocinas Epson Tarjetas de interfaz / adaptadores APRILIA Motocicletas
  • AEG FEE62800PM Grizzly G9961 Velleman PCUSB38 Smeg STA161S2 Brother DCP-7065DN
  • InSinkErator F-601R Guía de instalación Toshiba Portege 7140 Manual de usuario Prominy SR5 Rock Bass Manual de usuario Scarlett SC-012 Manual de usuario Antec NSK 1380 Manual de usuario