RADVision Scopia XT5000 Series Guía de instalación descargar pdf (Pagina 154)

Figure 99: GLAN1 port

Important:

If the GLAN2 port is enabled and in use, check that it is properly connected.

Solution

Assign a valid IP address to the system on GLAN1 or GLAN2, as described in

Configuring IP

Addresses on page 113.

Possible Causes

The system is capable of detecting IP/MAC addresses conflicts in a network. The conflict

occurs with static IP addresses if administrators have inadvertently attributed the same IP

addresses to devices or with dynamic IP addresses due to a DHCP server problem.

Solution

Verify that another the IP address defined for this endpoint is unique in the network. If there is

an address conflict, redefine the IP address.

If configuring from the endpoint, you must first enable advanced configuration, as described

in Maintaining the XT Endpoint Locally from the Endpoint on page 66.

1. From the endpoint's main menu, select Configure > Quick Setup.

2. Press Next several times until the Configure TCP/IP screen appears.

Figure 100: Configuring IP address

3. Enter the IP address.

Installation Guide for Scopia XT5000 Endpoint with Embedded

Server for IP Office Version 3.2

Troubleshooting the Scopia XT Endpoint for IP Office | 154

1 2 ... 149 150 151 152 153 154 155 156 157 158 159

Sin comentarios

RADVision Scopia XT5000 Series Guía de instalación Pagina 154