RADVision Scopia XT5000 Series Guía de instalación descargar pdf (Pagina 56)

Important:

We recommend changing the default credentials after logging in for the first time, as

described in the Administrator Guide for Scopia XT Endpoint for IP Office.

3. (Optional) Select the web interface language from the Language list.

4. Select Login.

Enabling Remote Management on the Scopia XT Endpoint for IP Office

About this task

Remote management on your Scopia XT Endpoint for IP Office is enabled by default. You can configure

the XT Endpoint so that it can be remotely managed from any computer in the network, or from a

specific computer only. You can do this procedure from the endpoint itself or from the XT Endpoint web

interface.

To remotely upgrade the XT Endpoint, you must also enable remote downloads, as described in

Configuring Remote Upgrade Settings on page 58.

We strongly recommend that you change the default credentials first time you access the XT Endpoint

remotely, described as part of the procedure below.

See Administrator Guide for the Scopia XT Endpoint for IP Office for information on maintenance tasks

to configure and manage your XT Endpoint.

Before you begin

To configure the network, contact your network administrator.

If configuring from the endpoint, you must first enable advanced configuration, as described in

Maintaining the XT Endpoint Locally from the Endpoint on page 66.

To modify the PIN, you must be connected via HTTPS (see below).

Procedure

1. Access the remote management settings, as follows:

•

From the XT Endpoint web interface, select Administrator Settings > Utilities >

Remote Access > Web.

•

From the endpoint's main menu, select Configure > Advanced > Utilities > Remote

Access > Web from the Main menu.

Installation Guide for Scopia XT5000 Endpoint with Embedded

Server for IP Office Version 3.2

Initial Configuration | 56

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 158 159

Sin comentarios

RADVision Scopia XT5000 Series Guía de instalación Pagina 56