RADVision Scopia XT5000 Series Guía de instalación descargar pdf (Pagina 115)

Field Name Description

Gateway IP Address If the system gets its IP address automatically, this field indicates

the gateway IP address assigned to the system.

If you entered the system’s IP address manually, type the gateway

IP address.

DNS Server IP

Address

If the system gets its IP address automatically, this field indicates

the DNS server IP address assigned to the system.

If you entered the system’s IP address manually, type the DNS

server IP address.

6. From the web interface only, select Save.

7. If you secured your XT Endpoint using TLS certificates and you now modified the IP address,

you must generate the CSR again, as described in Generating a Certificate Signing Request

for XT Endpoint on page 132.

Configuring Network Connectivity

About this task

This procedure describes how to configure the GLAN1 and GLAN2 ports.

You may want to enable both GLAN1 and GLAN2, for example, to use one network connection for

control and another for videoconferences.

Before you begin

If configuring from the endpoint, you must first enable advanced configuration, as described in

Maintaining the XT Endpoint Locally from the Endpoint on page 66.

Procedure

1. Access the network settings as follows:

•

From the XT Endpoint web interface, select Administrator Settings > Networks.

•

From the endpoint's main menu, select Configure > Advanced > Networks.

2. Select Parameters under GLAN.

Installation Guide for Scopia XT5000 Endpoint with Embedded

Server for IP Office Version 3.2

Initial Configuration | 115

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 158 159

Sin comentarios

RADVision Scopia XT5000 Series Guía de instalación Pagina 115