RADVision Scopia XT5000 Series Guía de instalación Pagina 48

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 159
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 47
3. Insert the three connectors of the camera cable (3 connectors on one side, 2 connectors on
the other side) to the sockets on the back of the camera, as shown in Figure 18: Connecting
cables to the back of the camera on page 41:
The DVI connector to the DVI socket
The 8-pin connector to the IN RS232C socket
The power connector to the DC IN 12V socket
Figure 26: Connecting cables to the back of the camera
4. Attach the two connectors on the other end of the camera cable as shown in Figure
27: Connecting cables to the Scopia XT Camera Switch on page 49:
a. The HDMI connector to the HDMI socket labeled 1 on the Scopia XT Camera Switch.
b.
The connector for power and serial control to the horizontal socket on the XT
Codec Unit.
Installation Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Setting up the Scopia XT Endpoint for IP Office | 48
Vista de pagina 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 158 159

Comentarios a estos manuales

Sin comentarios